We are one of the leading providers of solar LED applications in the world!

Home > News > Content
Low Operating Cost Of Split Solar Street Lamp
- Aug 09, 2017 -

Characteristics of Split-body solar street lamps

1, solar modules are made of monocrystalline silicon and polycrystalline silicon cells.

2, solar modules are designed according to the International Electrotechnical organization IEC-61215.1993 Standard.

3, structure, positive 3.2MM high transmittance (more than 92%) of low iron tempered glass, Split Type Solar Street Light back material for TPT, plastic film for Eva.

4, frame, aluminum oxide coating.

5, including multiple waterproof contact linker.

6, the component size can be adjusted according to customer requirements.


1, low operating costs, no energy consumption.

2, easy to install, Split Type Solar Street Light no need to lay a line and put a large number of installation costs.

3, can be used in different environments.

4, according to the actual load demand for accurate design.

5, low maintenance costs.

6, no fuel needed.

7. No noise during operation.

8, there is no easy to wear the moving parts.

9, no pollution, environmental protection.

10, can work under unattended environment for a long time.

11, the daily lighting time 6-8 hours, Split Type Solar Street Light can be 3 consecutive rainy days work.

Split Solar Street lamp on the battery, led lamp, photovoltaic panels separate, this must be equipped with lamp rods, batteries buried in the underground, Split Type Solar Street Light through the lamp rod inside the wire, during the day through the photovoltaic board storage, at night to the LED lamp power supply.

Split Solar streetlight Technical parameters can be from 10-80w or even higher, such as: new rural Solar Street Lamp series, in the configuration, according to the number of Watts, rainy day and other technical parameters to the corresponding configuration of battery, photovoltaic panel size, controller, etc., Split Type Solar Street Light but also according to the actual installation to adjust the exposure angle of photovoltaic panels;

Split Solar street lamps are mainly used for large roads, highways and other lamps need high places.